BCQWF - ZIP GRIP SUPER GLUE 5

  • MSDS: BCQWF
  • Manufacturer: DEVCON CORP
  • Product Name: ZIP GRIP SUPER GLUE 5
  • National Stock Number: 8040-00N008711
Product Identification

Product ID:ZIP GRIP SUPER GLUE 5
MSDS Date:01/01/1987
FSC:8040
NIIN:00N008711
MSDS Number: BCQWF

Responsible Party
DEVCON CORPORATION

Emergency Phone: 617-777-1100

Cage: 16059

Contractor
DEVCON CORP
DANVERS, MA 01923-3753 US

Telephone: 1-508-777-1100

Cage: 16059

Ingredients

DIMETHACRYLATE ESTER (CAS# 109-16-0) (10-75%)

CAS: 109-16-0

RTECS: OZ4100000


METHYL 2-CYANOACRYLATE

CAS: 137-05-3

RTECS: AS7000000

Fraction By Weight: 0-70%

OSHA PEL 2 PPM/4 STEL

ACGIH TLV: 2 PPM/4 STEL; 9192


ETHYL-2-CYANOACRYLATE (CAS# 708-85-0) (25-90%)

Hazards

Effects of Overexposure:EYE:BONDS VERY RAPIDLY,LACHRYMATOR,TEARING,EYE
+ UPPER RESP TRACT IRRIT.SKIN:BONDS VERY(SEE SUPP DAT

First Aid

First Aid:EYES:FLUSH IMMED W/PLENTY OF H*2O FOR @ LEAST 15 MIN.DONT
ATTEMPT TO FORCE LIDS OPEN.GET MED ATTN.SKIN:SOAK IMMED IN WARM
H*2O.REMOVE CURED ADHESIVE W/HOT SOAPY H*2O.INHAL:REMOVE TO FRESH
AIR.INGEST:I MMEDIATE BONDING OF SKIN/MOUTH.GET MED ATTN.

Fire Fighting

Flash Point:167F (75C), SCC
Extinguishing Media:CO*2,H*2O FOG,DRY CHEMICAL
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA + FULL
PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:CLOTHS USED TO WIPE UP SPILLS MAY CAUSE
RAPID POLYMERIZATION,POSS AUTO-IGNITION.SEE SPILL PROC SECT.

Accidental Release

Spill Release Procedures:SMALL SPILL:WIPE UP W/CLOTH.IMMED SOAK CLOTH
W/H*2O TO POLYMERIZE ADHESIVE.CAUTION:CLOTH CONTAINING ADHESIVE MAY
UNDERGO AUTO-IGNITION IF NOT SOAKED W/H*2O.LGE SPILL:FLOOD AREA
W/H*2O.WHEN CURED,REMOV E CURED FILM W/SCRAPER.WEAR NIOSH/ (SEEOTHR
PREC)

Handling

Handling and Storage Precautions:STORE IN COOL,DRY PLACE.KEEP AWAY FROM
HEAT/OPEN FLAMES.USE W/ADEQUATE VENT.AVOID SKIN,EYE/CLOTHING
CONTACT.READ INSTRUCTIONS CAREFULLY.
Other Precautions:KEEP OUT OF REACH OF CHILDREN. HAZ POLYM CONDTN TO
AVOID:IN RAPID POLYMERIZATION W/UNCONTRL RISE IN TEMP,BUILDUP OF
PRESS IN CLSD CNTNR.SPILL PROC:MSHA APPRVD RESPIRATOR/SCBA + PROT
CLOTHING.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN.
Ventilation:LOCAL EXHAUST TO KEEP VAPORS IN WORK AREA BELOW TLV LIMITS.
Protective Gloves:POLYETHYLENE
Eye Protection:SAFETY GLASSES.
Other Protective Equipment:DO NOT USE RUBBER OR CLOTH GLOVES.
Supplemental Safety and Health
BOILING PT @ 3 MM HG. PH (5 WT % IN H*2O)=7. OVEREXP
EFTS:RAPIDLY.INHAL:MUCOUS MEMBRANE + UPPER RESP TRACT
IRRIT.INGEST:IMMED BONDING OF SKIN/MOUTH. DOP:OCTOBER 1985.

Chemical Properties

Boiling Pt:B.P. Text:140F (60C)
Vapor Pres:0.3
Vapor Density:> 1
Spec Gravity:1.05
Solubility in Water:POLYMERIZES
Appearance and Odor:TRANSPARENT LIQUID;PUNGENT ODOR.
Percent Volatiles by Volume:0

Stability

Stability Indicator/Materials to Avoid:YES
H*2O,ALKALINE MATERIALS.
Stability Condition to Avoid:HIGH HUMIDITY,HIGH TEMP,ALKALINE
MATERIALS,H*2O.
Hazardous Decomposition Products:CO,CO*2,OXIDES OF NITROGEN.
Conditions to Avoid Polymerization:H*2O,ALKALINE MATL/PEROXIDE CONTAM
CAN RESULT(SEE OTHR PREC)

Disposal

Waste Disposal Methods:INCINERATE, OR SOLID ADHESIVE CAN BE LANDFILLED
IN ACCORDANCE WITH ALL APPLICABLE FEDERAL,STATE & LOCAL
ENVIRONMENTAL REGULATIONS.DO NOT POUR DOWN THE DRAIN.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.